Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the flexibility of gas cooktops but requires an oven for baking? Discover a dual-fuel range cooker that offers the best of both worlds.
Many home chefs with experience prefer gas cooktops due to their superior temperature control and capacity to employ advanced cooking techniques such as charcoaling. dual fuel range cooker with 13amp plug are expensive, especially if they require an additional gas connection and an electrician to install them.
What is a 13amp plug?
If you own dual fuel range cooker (also called an electric and gas oven) is required, you'll need an appropriate 13 amp plug. The plug also needs to be wired in the cooker ring circuit by a fully competent electrician.
This assures that the current that flows through the plug is safe and not too high which could cause an electrical fire hazard. The current is controlled by a fuse within the plug. The fuse explodes whenever the current passes through it beyond its capacity. This safeguards the appliance from an over-charge of electricity.
The fuse is rated 13 amps, as shown on top of the plug. This is the maximum amount of current that the plug could pass without damaging the appliance or heating the socket. When replacing fuses, it is essential to select the same amperage rating as the original. If you replace the fuse using one with a different rating, then you are at risk of overheating the socket and putting yourself and others in high risk.
A 13 amp fuse is likely to be a type of ceramic that is extremely durable and is able to withstand extreme temperatures generated by the range cooker. Ceramic is also fire-resistant, which makes it a better choice over other types of fuse.
There are a few different ways in which a 13 amp plug could be fitted. It could be wired to an existing live socket and the flex is connected to it by a screw or plastic jaw-type cord clamp. The clamp on the cord should be tightened after the plug is securely pushed into position.
Before connecting the wires, you might need to take off the wiring diagram on cardboard that is positioned over the pins of some plugs. The wires must be trimmed to the proper length, as if they are too long they can get crushed when the plug covers are replaced. The earth wire should be the longest to ensure that it is connected before the line and neutral pins.
How do I install a 13amp plug?
The majority of dual fuel range cookers sold in UK are powered by a 13 amp plug. This is important because ovens can draw substantial current, while the standard plug sockets have a rating of 10 amps.
In general, new appliances should include a plug at the point of sale. This is to ensure compliance with the Plugs and Sockets etc. (Safety Regulations) 1994. Older appliances may not have a plug and this could be the reason for the issue.
When connecting the cooker to an existing plug socket the first thing to do is to ensure that the rating of the fuse in the fuse box is in line with the plug's rating. This is very important as an incorrectly sized fuse could pose a risk.
It is also recommended to check that the fuse is seated in the cartridge and there isn't any movement within it. The next step is to prepare the flex to be used. Remove the sheathing to expose the three insulated conductors. Then, nick the sheathing at the point of entry to the plug (beyond the cord grip) using a utility knife, but without damaging the individual conductors. This nick must be large enough to allow for the cable and sheathing to separate when the sheathing is pulled back. Finally cut off the excess sheathing and leave about 40mm over the flexing end.
The flex is then positioned over the plug with the earth terminal at the top, and the neutral and live terminals at the bottom. Utilizing the colored conductors to guide you and the sheathing is removed from each pin and the internal cable is inserted to the correct terminal using the cord grip. If the plug is equipped with a cord clamp that is screw-type, let it loosen and then pull the insulation back to reveal the copper wires. Connect each wire that is insulated to the correct terminal using the channel inside the plug. Start with the earth conductor first, then the neutral and finally, the live.
What is the maximum current draw of a plug with 13amps?
The maximum current draw for a 13amp plug is 3kw at 230 volts. This is a lot of power, but the standard fuse that is fitted in a UK plugtop will not fail until the cable has heated to a dangerous level. A defective plug or socket may result in a fire, so it's important to be vigilant about the amount of power you use particularly in the kitchen.
The ceramic fuses that are used in plugtops weigh around 25mm and are rated for mains voltages of 240V. They'll have the BS kitemark or similar mark on the side and will contain sand. Alternatives to glass or plastic are available, but should never be used in combination with a live plug.
In the UK the majority of dual fuel range cookers are hard-wired. They are not able to be plugged directly into a wall outlet. They are usually connected using a dedicated cooker circuit, that is only suitable for appliances with a maximum of 20 amps.
Check the ring circuit of your home with the fuse box, or ask an electrician nearby. They will be able tell you whether the sockets in your home are connected to the same ring or separate and if there is a separate circuit for your oven.
The size of your kitchen will be one of the main factors when you're looking to buy a dual fuel range cooker. Luckily, we have a great range of cookers that will fit any space, from compact 50 - 60cm dual fuel models and vast 90cm+ double oven options from the top brands such as Rangemaster and StovesAreUs.
We also offer a wide variety of multifunction gas and electric cookers. These multifunction cookers let you cook a variety meals, like pasta, casseroles, and curries.
Currys offers a variety of Cookers. Explore our online selection or visit us in store to see the range. We offer free installation at home and delivery on a selection of range cookers, as well as flexible payment options. If you have any queries our team is available to assist - just drop us an email or give us a phone call. Credit is subject to status and terms and conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion regarding the maximum current draw of the cooker switch. The truth is that most cookers aren't made to plug into the standard socket, but instead are wired hard and connected to a specific oven ring circuit. This is due to the fact that they typically consume more than 20 amps of power when the gas hob and electric oven are in use.
Therefore, you will not find a dual fuel range cooker that could be fitted to a standard socket, as this would present a very significant fire risk and be against electrical safety regulations. An experienced electrician will install any new electrical wiring to an appliance in the kitchen and ensure that the total load (both the hob and oven) does not exceed the supply capability of that circuit.
Dual fuel range cookers mix the ability to cook with the sensitivity of a gas stove and the precision and accuracy of an electric oven. This is the reason they are popular among chefs and home cooks alike. Dual fuel range cookers are perfect to experiment with different cooking techniques, like searing or charring.
When you are looking to purchase a new range cooker you will need to consider several factors such as size, functionality and price. You will also need a gas connection in your home for the appliance. If you're not sure then book a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers includes options to suit a variety of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you're looking for something more sophisticated we have a selection of top JennAir models, which feature several unique features.
When you purchase a new dual fuel range cooker, it is essential to read the manual of the owner for specific information regarding the electrical and gas requirements. dual fuel range cookers ireland will need an electric connection to your home. A plumber might be required to install it for you. It is also possible to require a cooker-ring circuit that is installed by a qualified electrical engineer.